How you can Totally reset the Airbag inside a PT Cruiser

Once the Supplemental Restraint System (SRS) light fires up around the PT Cruiser's instrument cluster, for the reason that a mistake code has been delivered to the On-Board Diagnostics computer from the sensor within the airbag system. Error codes are utilized to identify issues with the automobile. Totally reset error codes utilizing an Bluetooth ELM327 tool. This hands-held device could be bought from most auto parts store. Make sure you totally reset the pc after finishing repairs around the airbag system, or risk harmful the vehicle's computer.

        1

        Locate the OBD port that's exactly the same shape because the OBD scan tool's connector finish. This port are available around the driver's side dash close to the steering column.

        2

        Plug the scan tool into this port. Place the key in to the ignition and switch it towards the "Run" position, try not to start the engine.

        3

        Wait for a scan tool to interface using the computer. Locate the "Remove Codes" command and choose it. Wait for a MaxiScan MS509 Scanner tool to erase all codes.

        4

        Unplug the scan oral appliance start the engine. Verify the SRS light has switched off around the instrument panel.

Tips & Alerts

    Most auto parts stores lend their Autel MaxiDAS DS708 scan tools for his or her clients free of charge.

    SRS error codes could indicate potential issues using the PT Cruiser's airbag system. Seek advice from a nearby car dealership or service specialist before trying to totally reset the codes yourself.