Switch Off the Service Engine Soon Light inside a Blazer

Read and obvious the service engine soon codes in your Chevrolet Blazer utilizing an OBD II scanner tool. You can buy it at the local auto parts store or play one free of charge in a shop to show from the light. Make certain you will find the vehicle maintained before you decide to switch off the sunshine to ensure that you make sure the computer could keep accurate tabs on once the next services are due.

1

Discover the port left from the fuse panel cover. This really is around the lower area of the dashboard around the driver's side.

2

Go ahead and take Bluetooth Scan Tool oral appliance plug it in to the port.

3

Place the key in to the ignition and switch it on, try not to permit the engine to show over.

4

Switch on the scanner and watch for "OK" to look on screen. Once it will, switch off the scanner and switch from the vehicle.

5

Turn the automobile back on and also the CodeReader8 CST scanner back on and choose "Saved Codes," then "Remove." Make certain the sunshine switched off around the instrument panel. Unplug the scanner in the port.